Final Audio Design S5000

Equipped with "tone chamber system" that brings out the sound of the earphone housing

Newly developed a "tone chamber system" that brings out the new possibilities of the BA driver. By providing a special acoustic space on the front of the driver, the sound of the BA driver's original acoustic characteristics brings out the sound of the housing material. In order to enable this system accurately, it is necessary to control the volume in the housing elaborately, so the adhesive used inside is limited to only a part that does not affect the sound quality, and otherwise. Assembled with adhesive lessons.
* What is a tone chamber?
A space design applied inside the body to control the sound and tone of instruments such as guitars.

Equipped with two full -range BA drivers with "horizontal face -to -face arrangement"

There are two BA drivers in a full range. The two drivers should have the same acoustic characteristics as much as possible, so they pair with stricter standards than usual. In addition, the two drivers are "horizontal opposition arrangements" in which the vibration inside is canceled, reducing the unnecessary resonance of the driver itself. In addition, this driver is also fixed in the housing with an adhesive less.

Brass cutting housing with high -precision processing

The housing is composed of brass, which is often used as a material for wind instruments, and is blasted. It features a softer, rich, dense and delicate sound compared to the S4000 of the stainless steel housing.

Design with the highest priority on the optimal installation

In addition to the normal mounting method, a cylindrical design that supports the mounting of the ears is adopted. By slightly swinging the angle of the joint between the housing and the cable connector, the cable is easier to fit the body, and the touch noise is reduced.

Next-generation earpiece Fusion-G attached

The triple hybrid structure that combines the ultra-density form x soft silicon x high elastic silicone has three sizes of the next-generation earpiece "Fusion-G" that combines high sound insulation and comfortable wearing feeling. I am.

Includes soft silver coated cable

The attached cable is a soft and well -handled specification to weave a 8 -core silver coat OFC line. The 2pin connector is a high -precision developed product and adopts the φ0.78 standard, which is considered to be the most versatile.

Repairable structure for long -term use

General earphones were difficult to decompose and repair because many parts were fixed with adhesive, and in many cases, when they fail, they needed to be replaced. The S5000 is designed to be disassembled using special tools, and is designed to be used for a long time.

* Disassembly and repair will not be covered by the product warranty, so please do not perform it yourself.